How to show device on linux

lspci -nnk

02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] [1000:0079] (rev 05)
 Subsystem: Intel Corporation RAID Controller RS2BL040 [8086:9260]
 Kernel driver in use: megaraid_sas
 Kernel modules: megaraid_sas

lspci -vmmnn

Slot: 02:00.0
Class: RAID bus controller [0104]
Vendor: LSI Logic / Symbios Logic [1000]
Device: MegaRAID SAS 2108 [Liberator] [0079]
SVendor: Intel Corporation [8086]
SDevice: RAID Controller RS2BL040 [9260]
Rev: 05

 lspci -v

02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
 Subsystem: Intel Corporation RAID Controller RS2BL040
 Flags: bus master, fast devsel, latency 0, IRQ 17
 I/O ports at 3000 [size=256]
 Memory at c1180000 (64-bit, non-prefetchable) [size=16K]
 Memory at c1140000 (64-bit, non-prefetchable) [size=256K]
 Expansion ROM at c1100000 [disabled] [size=256K]
 Capabilities: <access denied>
 Kernel driver in use: megaraid_sas
 Kernel modules: megaraid_sas